Ho – Ho – Oh No!

Posted: December 29, 2014 in Uncategorized
Tags: , , , , , ,

Here I am, on my way to work, and it is just a few days after Christmas. I left home on the morning of the 26th. It is now the 28th, and I just left Dubai, I am currently in Mauritius, approximately 11,339 mi (18,249 km) away from my Jeep… but, I was able to get some new goodies for the build before I left. Check out some of this stuff!

IMAG0515[1]  IMAG0513_1[1]  IMAG0514[1]  IMAG0512[1]

(Thank you Rick! You have been a great asset to the build!) Rick stopped by and dropped off a truck load of stuff for me! This is just a select few of the things he had to give me, I apologize for the MTV photos … I did not make time to properly showcase any of this, as I never meant to even post these pictures, they were only taken so that I could show Nathan and Tony the cool new toys I got. There is something about that steering wheel, that I really like! I think that it is the fact that the leather is all worn and perfectly patinaed. That big ol’ radiator fits perfectly behind my grille, and we are going to make the Hurst shifter handle longer, so that it comes up higher. In case you are wondering, I got two of the side-by-side seats. I plan on covering them in a seabag green canvas, but I will probably pay someone to do that, as I do not have a proper sewing machine in order to get these done they way they should be. If you are wondering what “seabag green” looks like, just think of any United States military member in transit. Or, you can check out this stock photo of one.

Screenshot_2014-12-28-16-41-37_1[1]

What now? Since it is going to be some time before I get back to the garage, I will try and get my administrative duties taken care of while I am not so distracted with all of that garage business. Although, once I do get home, I may need to hold off on the Jeep build, as the Pirate Ship will be requiring my attention due to its restrictive timeline. I will be focusing time and energy to that, until I can put it to a proper stopping point. The Pirate Ship is due to set sail the first week of April, and that means I have a lot of welding to do there. It should not take me too long though, as my welding projects are short, in nature – I just need to weld up the wench’s deck and the poop deck (the aft seating). But all of that is for another blog, this one here is for the FrankenJeep build!

I have most of what I need to make the front drop axle. (Thank you Jerry!) He provided me with the cut up Dana 44 so that I did not need to go chopping up a perfectly good axle. He also hooked me up with the trailer drop axle. Now, I just need to get a hold of some 220V welding, and I can get to axle fabrication! I would show you some pictures here, but the problem is, I do not have it in a comprehensible state. What I mean is, even if I did have photos for you, they would make absolutely no sense, as I only have half a Dana 44 with outers (there is no center to it), and an eight foot trailer axle. I will ensure to get some build pictures for you though.

I do have a new idea, a more concise idea, on how to do the fuel tank/gauge system. I am still going to utilize the 30 lb gas gauge,IMAG0574_1[1] I have just refined its use. You see, I was trying to figure out how turn the flange 90°, so that the gauge faces outwards, towards the rear, instead of sideways. Instead of doing that, I will just mount it to the side of something back there, say… a Jerry can.

I will mount the fuel gauge to the Jerry can, like shown in the photo, and then hard mount the can to the bumper, so it is sturdy. Next, I will grommet the can through the tub of the Jeep, connecting it into the fuel cell. This does multiple things for me. Among them, it solves the fuel gauge dilemma. It gives me a fill point, in order to actually fill up the Jeep, without having an unsightly gas cap cover. It also provides me with a guaranteed five gallons of fuel, and that is good.

When I get home, I should be able to go and retrieve all of my tools. That is a very good thing! I am pretty stoked about that. I should have a fairly decent stock of tools that should get me started, at least I will be able to have most of the tools I need in order to make my jobs easier. I do not know if you are aware how difficult it is to even do maintenance on a vehicle, let alone build one, when you only have a 285 piece tool set (thank you Wes!) and an Estwing claw hammer. My brother hooked me up with a nice tool set a few years ago for Christmas. I have been using the crap out of it, and keeping it clean, ever since. The problem comes when I have more than one person working on the vehicle, and when I need two wrenches, or when I do anything electrical. So, I got a tool box and some tools coming to me, and they should be ready for pick up when I get back.

So, between the work on the Pirate Ship, and the (anticipated) short stay home, I fear that I will not make too much progress on the Jeep when I return, in February. I will ensure that I give you any updates on the projects that I do complete, and I hope to see you here again soon…

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s